[1]何超,栗保华,施长军,等.圆台形FAE装置抛撒初期燃料运动特性研究[J].爆破器材,2021,50(04):30-34,39.[doi:10.3969/j.issn.1001-8352.2021.04.006]
 HE Chao,LI Baohua,SHI Changjun,et al.Fuel Movement Characteristics of Cone-Shaped FAE Device at the Initial Stage of Spreading[J].EXPLOSIVE MATERIALS,2021,50(04):30-34,39.[doi:10.3969/j.issn.1001-8352.2021.04.006]
点击复制

圆台形FAE装置抛撒初期燃料运动特性研究()
分享到:

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
50
期数:
2021年04
页码:
30-34,39
栏目:
爆炸材料
出版日期:
2021-07-07

文章信息/Info

Title:
Fuel Movement Characteristics of Cone-Shaped FAE Device at the Initial Stage of Spreading
文章编号:
5580
作者:
何超栗保华施长军许志峰王世英
西安近代化学研究所(陕西西安,710065)
Author(s):
HE Chao LI Baohua SHI Changjun XU Zhifeng WANG Shiying
Xi’an Modern Chemistry Research Institute (Shaanxi Xi’an, 710065)
关键词:
FAE装置圆台形燃料抛撒药
Keywords:
FAE device cone shape fuel dispersant
分类号:
TJ55
DOI:
10.3969/j.issn.1001-8352.2021.04.006
文献标志码:
A
摘要:
为研究圆台形燃料空气炸药(FAE)装置燃料抛撒运动特性,利用ANSYS/LSDYNA软件对燃料初始抛撒过程进行了数值模拟,得到了不同位置处的燃料抛撒初速,分析了中心抛撒药结构对燃料抛撒的影响,并进行了实验验证。结果表明:圆台形FAE装置不同位置处的燃料抛撒初速与截面比药量有关,燃料抛撒初速随截面比药量的增加而增加;相较于等直径中心抛撒药,采用变直径中心抛撒药时截面比药量一致性更好,有利于减小不同位置处燃料抛撒的速度差。
Abstract:
In order to study the motion characteristics of fuel dispersal in cone-shaped FAE device, the process of initial fuel dispersal was numerically simulated by ANSYS/LSDYNA software, the initial velocity of fuel dispersal at different positions was obtained, and the influence of central dispersal structure on the fuel dispersal was analyzed. The results show that the initial velocity of fuel dispersal at different positions of the cone-shaped FAE device is related to the specific charge amount of the cross section, and the initial velocity of fuel dispersal increases with the increase of the specific charge amount of the cross section. Compared with the uniform diameter center dispersal, the consistency of the specific charge amount of the cross section is better when the variable diameter center dispersal is used, which is conducive to reducing the difference of the fuel dispersal velocity at different positions.

参考文献/References:

[1]薛社生, 刘家骢, 秦承森,等. 燃料爆炸抛撒成雾的实验与数值研究[J]. 爆炸与冲击, 2001, 21(4):272-276.
XUE S S, LIU J C, QIN C S, et al. Experimental and numerical investigation on explosive dispersal and cloud forming[J]. Explosion and Shock Waves, 2001, 21(4):272-276.
[2]王德润, 沈兆武, 周听清,等. 液态燃料爆炸抛撒及云雾形成的实验研究[J]. 流体力学实验与测量, 2004, 18(4):15-19.
WANG D R, SHEN Z W, ZHOU T Q, et al. Experimental study on explosive dispersion and cloud formation of liquid fuel[J]. Experiments and Mesurements in Fluid Mechanics, 2004, 18(4):15-19.
[3]SINGH S K, SINGH V P. Extended near-field modeling and droplet size distribution for fuelair explosive warhead[J]. Defense Science Journal, 2002, 51(3):303-314.
[4]SALLAM K, DAI Z, FAETH G M. Liquid breakup at the surface of turbulent round liquid jets in still gases[J]. International Journal of Multiphase Flow, 2002, 28(3):427-449.
[5]惠君明. FAE燃料抛撒与云雾状态的控制[J]. 火炸药学报, 1999,22(1):10-13.
HUI J M. FAE fuel throw and control of cloud state[J]. Chinese Journal of Exlposives & Propellants, 1999,22(1):10-13.
[6]李建平, 白春华, 郭昭平. 云爆装置初始作用过程数值模拟[J]. 弹箭与制导学报, 2009, 29(5):123-125,132.
LI J P, BAI C H, GUO Z P. Numerical simulation of the initial interaction process of FAE device[J]. Journal of Projectiles,Rockets,Missiles and Guidance, 2009, 29(5):123-125,132.
[7]郭俊,余文力,王少龙,等.端盖对FAE燃料抛撒影响的数值模拟[J].四川兵工学报, 2013, 34(6):65-67.
GUO J, YU W L, WANG S L, et al.Numerical simulation on influence of cover to spill of liquid fuel of FAE[J]. Journal of Sichuan Ordnance, 2013, 34(6):65-67.
[8]王晔, 白春华, 李建平. 弹壳体结构对燃料装药抛撒速率影响的数值模拟研究[J]. 兵工学报,2017, 38(1):43-49.
WANG Y, BAI C H, LI J P. Influence of shell structure on dispersing velocity of fuel-air mixture[J]. Acta Armamentarii, 2017, 38(1):43-49.
[9]王永旭, 解立峰, 贾晓亮, 等. 300 kg装药FAE燃料爆炸抛撒成雾的实验研究[J].爆破器材, 2020, 49(2):23-28.
WANG Y X, XIE L F, JIA X L, et al. Experimental study on 300 kg charge of FAE clouds by explosion dispersal[J]. Explosive Materials, 2020, 49(2):23-28.

备注/Memo

备注/Memo:
收稿日期:2020-03-12
第一作者:何超(1988-),硕士,工程师,主要从事云爆战斗部研究工作。E-mail:hfhc1988_2008@163.com
更新日期/Last Update: 2021-07-08