[1]熊言涛①,魏善太①,吴继昌②,等.一种上向深孔现场混装用乳胶基质的研究[J].爆破器材,2020,49(04):39-44.[doi:10.3969/j.issn.1001-8352.2020.04.007]
　XIONG Yantao,WEI Shantai,WU Jichang,et al.Study on an Emulsion Matrix Used for Upward Deep Hole[J].EXPLOSIVE MATERIALS,2020,49(04):39-44.[doi:10.3969/j.issn.1001-8352.2020.04.007]
点击复制

一种上向深孔现场混装用乳胶基质的研究()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
49
期数:
2020年04
页码:
39-44
栏目:
爆炸材料
出版日期:
2020-07-03

文章信息/Info

Title:
Study on an Emulsion Matrix Used for Upward Deep Hole
文章编号:
5460
作者:
熊言涛①; 魏善太①; 吴继昌②; 李建真②
①安徽江南化工股份有限公司（安徽合肥，230088）
②安徽江南化工股份有限公司宁国分公司（安徽宁国，242310）
Author(s):
XIONG Yantao①;  WEI Shantai①;  WU Jichang②; LI Jianzhen②
① Anhui Jiangnan Chemical Industry Co., Ltd. (Anhui Hefei, 230088)
② Ningguo Branch, Anhui Jiangnan Chemical Industry Co., Ltd. (Anhui Ningguo, 242310)
关键词:
上向孔; 乳胶基质; 混装乳化炸药; 远程配送
Keywords:
upward holes;  emulsion matrix;  mixed emulsion explosive;  remote distribution
分类号:
TD235.2+1;TQ560
DOI:
10.3969/j.issn.1001-8352.2020.04.007
文献标志码:
A
摘要:
针对国内地下矿山上向孔深孔装药仍采用人工装药，存在返粉率高、爆破效果不稳定及工人劳动强度大等问题，基于理论机理分析及批量装药试验，生产了可用于地下矿的上向深孔用乳胶基质，系统研究了该乳胶基质的抗颠簸试验、泵送试验、储存期试验、黏度试验、爆炸性能等。结果表明，在试验条件下，该乳胶基质储存期可达6个月以上，可在道路500 km内长距离运输不破乳，20 ℃乳胶基质黏度为90~100 Pa·s，不掉药，经敏化装药后爆破效果较好，符合GB/T 14372—2013、GB 50089—2018及GB 28286—2012行业标准要求。为发展地下矿山混装乳化炸药一站多点的模式提供性能可靠的混装产品。
Abstract:
Manual charging for upward deep holes is still being used in domestic underground mines where some problems such as high powder return rate, unstable blasting effect and high labor intensity were observed. Based on theoretical mechanism analysis and batch charging test, an emulsion matrix used for upward holes was produced and studied in view of its anti-bumping, pumping, storage period, viscosity and blast performance. Results show that the matrix has a storage period of over 6 months; can be transported for a long distance within 500 km without demulsification and has a viscosity of 90~100 Pa·s at 20℃, which ensures the absence of fall-off from charge. Meanwhile, the matrix has a good blasting effect after sensitization, which meets the industry standards of GB/T 14372—2013, GB 50089—2018 as well as GB 28286—2012, providing a reliable mixing agent for the deployment of one station, multi-locations mode.

参考文献/References:

[1]夏光．工业炸药现场混装技术的应用与发展趋势[J]．煤矿爆破，2019，37(1)：27-30．
XIA G．Application and development trend of mixed technology site for industrial explosives[J]． Coal Mine Blasting，2019，37(1)：27-30．
[2]刘杰，徐志祥,孔煜．乳化炸药稳定性及其破乳机理研究[J]．爆破器材，2015，44（6）：38-42．
LIU J，XU Z X, KONG Y．Storage stability and demulsion mechanism of emulsion explosives[J]．Explosive Materials，2015，44（6）：38-42．
[3]张续，吴红波,张洪，等．油相材料对现场混装乳化炸药性能的影响[J]．安徽化工，2019，45（5）：65-67．
ZHANG X，WU H B, ZHANG H,et al．Effect of oil phase materials on the performance of field mixed emulsion explosive[J]．Anhui Chemical Industry，2019，45（5）：65-67．
[4]卢文川，孟昭禹,马军，等．乳化剂和油相材料对现场混装乳化炸药基质稳定性的影响[J]．爆破器材，2019,48（6）：7-13．
LU W C，MENG Z Y, MA J,et al．Effect of emulsifier and oil on the stability of bulk emulsion explosive matrix[J]．Explosive Materials，2019,48（6）：7-13．
[5]黄铁飞．乳化剂对混装乳化炸药质量性能的影响及实践应用[J]．爆破器材，2010，39(2)：14-16．
HUANG T F．Effect of emulsifier on the quality performance of emulsion explosive and its practical application[J]．Explosive Materials，2010,39(2)：14-16．
[6]马平，谭本岭,叶辉， 等．乳胶基质黏度影响因素研究[J]．工程爆破，2015，21(3)：9-12．
MA P， TAN B L, YE H,et al． Study on the influence factors of emulsion matrix ciscosity[J]．Engineering Blasting，2015，21(3)：9-12．
[7]刘晓文，李建彬,龚兵，等．现场混装乳化炸药敏化速度控制的试验研究[J]．煤矿爆破，2017(2)：18-20．
LIU X W, LI J B, GONG B,et al．Experimental study on sensitization rate control of site mixed emulsion explosive[J]．Coal Mine Blasting，2017(2)：18-20．
[8]冯有景．现场混装炸药车[M]．北京：冶金工业出版社，2014：246-247,265．
[9]韦锦初，开俊俊．乳胶基质远程配送及储存技术的探讨[J]．煤矿爆破，2011（4）：35-36．
WEI J C，KAI J J．Discussion on the techniques of long-distance delivery and storage of emulsion matrix[J]． Coal Mine Blasting，2011（4）：35-36．
[10]吴秋洁，谭柳,吴鹏，等．环境冲击对车载乳胶基质破乳的影响[J]．爆破器材，2017，46(1)：17-23．
WU Q J，TAN L, WU P,et al．Influence of environmental shock on the demulsification of vehicle-mounted emulsion[J]．Explosive Materials，2017, 46(1)：17-23．
[11]黄麟，花宝玲,查正清， 等．上向深孔装填混装乳化炸药工艺技术的开发及应用[J]．矿冶，2017，26(4)：15-18．
HUANG L，HUA B L, ZHA Z Q,et al．Development and application of the mixed emulsion explosive loading technology in deep up-hole[J]．Mining & Metallurgy，2017，26(4)：15-18．
[12]汪旭光．乳化炸药[M]．北京：冶金工业出版社，2008：653-654．

相似文献/References:

[1]杨长青,王有会.浅谈影响乳胶基质物理敏化密度的因素[J].爆破器材,2011,40(02):20.
　YANG Changqing,WANG Youhui.Brief Discussion on the Factors Affecting Physical Sensitization Density of Emulsion Matrix[J].EXPLOSIVE MATERIALS,2011,40(04):20.
[2]徐志祥,叶志文,刘大斌,等.乳胶基质流动模型及其温度和速度的分布研究[J].爆破器材,2009,38(02):5.
　XU zhixiang,YE zhiwen,LIU Dabin,et al.Study on Flow Model and Distribution of Temperature and Pressure of Emulsion Matrix[J].EXPLOSIVE MATERIALS,2009,38(04):5.
[3]陈飞,邢光武,甘德淮,等.敞开式无动力冷却器的研制[J].爆破器材,2011,40(04):12.
　CHEN Fei,XING Guangwu,GAN Dehuai,et al.Development of Open Unpowered Cooler[J].EXPLOSIVE MATERIALS,2011,40(04):12.
[4]陈飞,邢光武,江志华,等.多元易发泡型复合乳化剂乳化炸药的制备[J].爆破器材,2011,40(06):23.
　CHEN Fei,XING Guangwu,JIANG Zhihua,et al.Preparation of Emulsion Explosive Containing Multielement Foaming Composite Emulsifying Agent[J].EXPLOSIVE MATERIALS,2011,40(04):23.
[5]开俊俊,申卫峰,雷鹏灿,等.乳胶基质微乳液低温快速发泡技术的研究[J].爆破器材,2013,42(02):31.[doi:10.3969/j.issn.1001-8352.2013.02.008]
　KAI Junjun,SHEN Weifeng,LEI Pengcan,et al.Research on the Low Temperature Rapid Foaming Technology of Microemulsion for Emulsion Matrix[J].EXPLOSIVE MATERIALS,2013,42(04):31.[doi:10.3969/j.issn.1001-8352.2013.02.008]
[6]迟洪鹏,李鑫,查正清,等.乳胶基质运输车储存罐体及输送系统设计[J].爆破器材,2015,44(01):28.[doi:10.3969/j.issn.10018352.2015.01.007]
　CHI Hongpeng,LI Xin,ZHA Zhengqing,et al.Design of Storage Tank and Conveying System of Emulsion Matrix Truck[J].EXPLOSIVE MATERIALS,2015,44(04):28.[doi:10.3969/j.issn.10018352.2015.01.007]
[7]宋力骞,叶志文,徐乾.优质失水山梨醇倍半油酸酯的合成[J].爆破器材,2015,44(04):24.[doi:10.3969/j.issn.1001-8352.2015.04.006]
　SONG Liqian,YE Zhiwen,XU Qian.Synthesis of High Quality Sorbitan Sesquioleate[J].EXPLOSIVE MATERIALS,2015,44(04):24.[doi:10.3969/j.issn.1001-8352.2015.04.006]
[8]吴鹏①,刘静平①②,陈相③,等.温度冲击对车载乳胶基质安全性的影响[J].爆破器材,2016,45(01):56.[doi:10.3969/j.issn.1001-8352.2016.01.013]
　WU Peng,LIU Jingping,CHEN Xiang,et al.Effect of Temperature Shock on the Safety of Vehicle Emulsion Matrix[J].EXPLOSIVE MATERIALS,2016,45(04):56.[doi:10.3969/j.issn.1001-8352.2016.01.013]
[9]綦海军,明刚,刘再强,等.乳胶基质管路的压力降研究与安全性分析[J].爆破器材,2016,45(02):47.[doi:10.3969/j.issn.1001-8352.2016.02.012]
　QI Haijun,MING Gang,LIU Zaiqiang,et al.Research on Pressure Drop and Safety in Transport Pipes of Emulsion Matrix[J].EXPLOSIVE MATERIALS,2016,45(04):47.[doi:10.3969/j.issn.1001-8352.2016.02.012]
[10]张小勇,周宇,杨敏会,等.30 t级乳胶基质配送车的设计研究[J].爆破器材,2018,47(01):37.[doi:10.3969/j.issn.1001-8352.2018.01.007]
　ZHANG Xiaoyong,ZHOU Yu,YANG Minhui,et al.Design and Research of an Emulsion Matrix Delivery Vehicle with the Capacity of 30 Tons[J].EXPLOSIVE MATERIALS,2018,47(04):37.[doi:10.3969/j.issn.1001-8352.2018.01.007]

备注/Memo

备注/Memo:
收稿日期：2020-03-11
第一作者：熊言涛（1988-），男，硕士，工程师，主要从事民爆器材的研究。E-mail：xiongyt@dunan.cn
更新日期/Last Update: 2020-07-02