[1]李必红,李哲雨,李尚杰,等.活性粉末药型罩射孔弹穿孔性能试验研究[J].爆破器材,2020,49(01):45-48.[doi:10.3969/j.issn.1001-8352.2020.01.009]
　LI Bihong,LI Zheyu,LI Shangjie,et al.Penetrating Performance Test of Shaped Charge with Active Powder Liner[J].EXPLOSIVE MATERIALS,2020,49(01):45-48.[doi:10.3969/j.issn.1001-8352.2020.01.009]
点击复制

活性粉末药型罩射孔弹穿孔性能试验研究()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
49
期数:
2020年01
页码:
45-48
栏目:
爆炸材料
出版日期:
2020-01-20

文章信息/Info

Title:
Penetrating Performance Test of Shaped Charge with Active Powder Liner
文章编号:
5417
作者:
李必红; 李哲雨; 李尚杰; 王喜; 杨翕智
西安物华巨能爆破器材有限责任公司（陕西西安，710061）
Author(s):
LI Bihong;  LI Zheyu;  LI Shangjie;  WANG Xi;  YANG Xizhi
Xi’an Wuhua Ju’neng Blasting Equipment Co., Ltd. (Shaanxi Xi’an, 710061)
关键词:
反应材料; 药型罩; 镍-铝金属间化合物; 射孔弹; 性能
Keywords:
reactive material;  liner;  Ni-Al intermetallic compound;  shaped charges;  performance
分类号:
TJ410.3+33
DOI:
10.3969/j.issn.1001-8352.2020.01.009
文献标志码:
A
摘要:
为实现射孔弹对目标靶穿孔性能和孔道后效的共同作用，设计了一种高密度活性镍-铝金属体系药型罩。通过改变药型罩配方中钨粉、镍粉和铝粉的质量比，进行了相应地面穿目标靶对比试验，得到最佳效果的活性金属粉末药型罩配方。试验结果显示，当活性配方中钨粉、镍粉、铝粉的质量比为70.0∶6.6∶13.4时，地面钢靶穿孔孔道容积最大，穿孔效果最佳；地面模拟围压穿砂岩靶的穿孔孔道干净，射流后效作用能力显著。
Abstract:
A high density active aluminum-nickel metal system liner was designed to ensure the joint effect of perforating charge on target in perforating performance and its aftermath. The optimized formulation of the active metal powder liner was obtained through a series of ground penetrating target contrast tests by alternating the mass ratio of tungsten powder, nickel powder and aluminum powder. The experimental results show that the steel target has the largest volume and the best perforation effect at the mass ratio of tungsten powder, nickel powder and aluminum powder of 70.0∶6.6∶13.4, and simulated confining pressure through sandstone target has the cleanest perforation channel and remarkable jet after effect.

参考文献/References:

［1］HUANG H, GROVE B M, KNEISL P.Shaped charge:US 8167044 B2［P］. 2012-05-01.
［2］FLYNN,DENNIS,JOSEPH,et.al.Reactive materials:WO 120605 A1［P］.2016-08-04.
［3］GLENN C S. Shaped charge liner comprised of reactive materials：US 2012/0234194 A1［P］.2012-09-20.
［4］LANGAN T,BUCHTA W M, RILEY M A. Reactive materials and thermal spray methods of making same:US 9499895 B2［P］.2016-11-22.
［5］FLYNN D J, KENNETT E J.Reactive materials:US 0355647 A1［P］.2017-12-14.
［6］LOEHKEN J O.Shaped charge liner,method of making same,and shaped charge incorporating same:US 9862027 B1［P］.2018-01-09.
［7］李尚杰,王峰,王喜,等.射孔弹用活性药型罩技术发展现状［J］.广州化工,2019,47(7):34-37.
LI S J, WANG F, WANG X,et al. Development and current situation of reactive liner of shaped charge［J］.Guangzhou Chemical Industry, 2019,47(7):34-37.
［8］张子敏,许碧英,阎峰,等.活性金属药型罩射孔弹破甲试验研究［J］.爆破器材,2013,42(4):53-56.
ZHANG Z M, XU B Y,YAN F, et al.Penetrating test of active metal charge liner perforating bullet［J］.Explosive Materials, 2013,42(4):53-56.
［9］陆必志,龙坚战.Ni-Al金属间化合物合成机理的研究［J］.硬质合金,2011,28(5):276-282.
LU B Z, LONG J Z.Study on the synthesis mechanism of Ni-Al intermetallic compound［J］. Cemented Carbide,2011,28(5):276-282.

相似文献/References:

[1]屈璟林,王宝兴,李森元,等.柔性聚能切割技术在防盗门开窗中的应用研究[J].爆破器材,2010,39(06):26.
　QU Jinglin,WANG Baoxing,LI Senyuan,et al.Study on the Application of the Flexible Shaped Charge Cutting Technology in the Channeling of Metal Safety Doors[J].EXPLOSIVE MATERIALS,2010,39(01):26.
[2]赖康华,杜明章,雷新华,等.正交试验在粉末药型罩制造工艺参数研究中的应用[J].爆破器材,2010,39(06):34.
　LAI Kanghua,DU Mingzhang,LEI Xinhua,et al.Application of Orthogonal Design in Manufacturing Technological Parameters Study of Powder Liner[J].EXPLOSIVE MATERIALS,2010,39(01):34.
[3]向旭,赵世华,谢湛.钨的SEM、EDS特性对射孔弹性能及生产的影响[J].爆破器材,2008,37(05):36.
　Xiang Xu,Zhao Shihua,Xie Zhan.Influence of SEM, EDS of Tungsten on the Performance and Production of Perforating Charge[J].EXPLOSIVE MATERIALS,2008,37(01):36.

备注/Memo

备注/Memo:
收稿日期：2019-10-12
第一作者：李必红（1978－），男，硕士，高工，主要从事石油射孔弹和非常规油气井射孔工艺开发。E-mail: forredlove@qq.com
更新日期/Last Update: 2020-01-20