[1]戴国诚①,贾鑫①,黄正祥①,等.破片头部系数对TNT冲击起爆临界速度影响规律研究[J].爆破器材,2020,49(02):34-39.[doi:10.3969/j.issn.1001-8352.2020.02.006]
　DAI Guocheng,JIA Xin,HUANG Zhengxiang,et al.Influence of Fragment Head Coefficient on the Critical Velocity of Shock Initiation of TNT[J].EXPLOSIVE MATERIALS,2020,49(02):34-39.[doi:10.3969/j.issn.1001-8352.2020.02.006]
点击复制

破片头部系数对TNT冲击起爆临界速度影响规律研究()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
49
期数:
2020年02
页码:
34-39
栏目:
爆炸材料
出版日期:
2020-04-07

文章信息/Info

Title:
Influence of Fragment Head Coefficient on the Critical Velocity of Shock Initiation of TNT
文章编号:
5392
作者:
戴国诚①; 贾鑫①; 黄正祥①; 夏明②; 唐德荣①; 陈思敏①; 谭亚平①
①南京理工大学机械工程学院（江苏南京,210094）
②中国人民解放军军事科学院国防工程研究院工程防护研究所（河南洛阳,471023）
Author(s):
DAI Guocheng①;  JIA Xin①;  HUANG Zhengxiang①;  XIA Ming②;  TANG Derong①;  CHEN Simin①; TAN Yaping①
① School of Mechanical Engineering, Nanjing University of Science and Technology (Jiangsu Nanjing, 210094)
② Institute of Engineering Protection, IDE, AMS, PLA (He’nan Luoyang, 471023)
关键词:
破片; 冲击起爆; TNT; 临界速度; 头部形状
Keywords:
fragment;  shock initiation;  TNT;  critical velocity;  head shape
分类号:
TJ012.4
DOI:
10.3969/j.issn.1001-8352.2020.02.006
文献标志码:
A
摘要:
为研究破片头部形状在炸药冲击起爆中的影响，基于破片冲击起爆炸药的临界能量判据准则，结合LS-DYNA有限元软件，分别计算了正四棱柱破片、正六棱柱破片、圆柱破片、模拟弹丸破片（fragment-simulating projectiles，FSP）和球头形破片等5种破片冲击起爆TNT装药的理论和仿真速度阈值，并拟合出FSP冲击起爆炸药的理论头部形状系数。结果表明，在相同质量和撞击横截面积下，不同头部形状的破片撞击TNT装药的起爆阈值不等；起爆时间与破片的动能大小有关，动能越大，起爆时间越短。对于多边正棱柱类型的破片（如正四棱柱破片、正六棱柱破片、正八棱柱破片等），提出了以正棱柱的外接圆柱作为简化模型来计算多边形正棱柱破片冲击起爆TNT速度阈值，发现多边正棱柱破片横截面的边数越多，计算结果与数值模拟结果吻合越好。
Abstract:
In order to study the effect of fragment head shape on the detonation of explosives, calculations using LS-DYNA finite element software based on critical energy were conducted on five types of positive four-prism, positive six-prism, cylindrical fragment, fragment simulating projectiles (FSP) and spherical head, respectively. Theoretical and simulation speed thresholds of blasting TNT, and theoretical head shape coefficient of the simulated projectile fragment were fitted. Results show that with the same mass and impact cross-sectional area, initiation threshold values of TNT are different for different head shapes. Initiation time relates to the kinetic energy of the fragment. The larger the kinetic energy, the shorter the initiation time. For multilateral positive prismatic fragments (such as positive four-prism fragments, positive hexagonal fragments, positive octagonal fragments), a simplified model was proposed to calculate TNT speed threshold by the impact of polygon positive prismatic fragments. It was found that the more sides of the cross section of the multilateral positive prismatic fragment, the better the result of numerical simulation.

参考文献/References:

［1］COOK M D, HASKINS P J. Projectile impact initiation of a homogeneous explosive［J］.AIP Conference Procee-dings, 1996,370(1):823-826.
［2］刘鹏飞. 破片特性对冲击起爆B炸药比动能阈值的影响［D］.太原：中北大学,2017.
?LIU P F. Influence of fragment characteristics on the threshold specific kinetic energy of impacting on covered comp B［D］.Taiyuan:North University of China,2017.
［3］赵锋, 孙承纬, 卫玉章. 非均质固体炸药的冲击引爆临界能量判据研究［J］. 爆炸与冲击, 1993, 13(1):41-48.
?ZHAO F, SUN C W, WEI Y Z. Critical energy criterion for the shock initiation of heterogeneous explosve［J］. Explosion and Shock Waves, 1993, 13(1):41-48.
［4］BOLDUC M，JAGER H. Summary of newly ratified NATO standard AEP 2920, Ed. A, V1［R］. Allied Engineering Publication approved by NATO Army Armaments Group RDDC，2016:65.
［5］Department of defense test method standard:MIL-STD-1916［S］.1997.
［6］赵熹. 大口径弹体辊挤:引伸成形技术研究［D］.太原：中北大学,2014.
ZHAO X. Research on rolling-extrusion and drawing technology of the large caliber projectiles［D］. Taiyuan:North University of China,2014.
［7］崔宇,马宏昊,沈兆武,等.爆炸二极管的数值模拟设计［J］.含能材料,2017,25(4):266-272.
?CUI Y, MA H H, SHEN Z W, et al. Numerical simulation and design of explosive diode［J］.Chinese Journal of Energetic Materials, 2017,25(4):266-272.
［8］JAMES H R. Critical energy criterion for the shock initiation of explosives by projectile impact［J］. Propellants, Explosives, Pyrotechnics, 1988, 13(2): 35-41.
［9］BAHL K L, VANTINE H C, WEINGART R C. Shock initiation of bare and covered explosives by projectile impact ［electronic resource］［R］. Lawrence Livermore National Lab., CA ,USA, 1981:16.
［10］MEYERS M A. 材料的动力学行为［M］. 张庆明,刘彦,黄风雷,等译.北京：国防工业出版社，2006：80.
?MEYERS M A. Dynamic behavior of materials［M］.ZHANG Q M,LIU Y, HUANG F L, Trans.Beijing:National Defense Industry Press，2006:80.
［11］苏林祥，毕祝，孙义亭.非均匀凝聚炸药冲击起爆的数值模拟［J］.爆炸与冲击，1981(2)：12-22.
SU L X, BI Z, SUN Y T.Numerical simulation of shock initiation of heterogeneous condensed explosives［J］.Explosion and Shock Waves,1981(2)：12-22.

相似文献/References:

[1]沈盼盼①,杜富贵②,刘祖亮①.超细DADNBF的性能研究[J].爆破器材,2014,43(01):19.[doi:10.3969/j.issn.1001-8352.2014.01.004]
　SHEN Panpan,DU Fugui,LIU Zuliang.Properties Research of Ultrafine DADNBF[J].EXPLOSIVE MATERIALS,2014,43(02):19.[doi:10.3969/j.issn.1001-8352.2014.01.004]
[2]王利侠①,周涛①,贺海民①,等.聚能射流引爆屏蔽B炸药的数值模拟及试验[J].爆破器材,2015,44(05):56.[doi:10.3969/j.issn.1001-8352.2015.05.013]
　WANG Lixia,ZHOU Tao,HE Haimin,et al.Numerical Simulation and Experimental Investigation of Initiation of Shielded Composition B Impacted by Shaped Charge Jet[J].EXPLOSIVE MATERIALS,2015,44(02):56.[doi:10.3969/j.issn.1001-8352.2015.05.013]
[3]刘鹏①,王雨时①,闻泉①,等.基于输出特性仿真的引信传爆管结构优化[J].爆破器材,2016,45(05):23.[doi:10.3969/j.issn.1001-8352.2016.05.005]
　LIU Peng,WANG Yushi,WEN Quan,et al.Structural Optimization of Fuze Booster Based on Simulation of Its Output Characteristics[J].EXPLOSIVE MATERIALS,2016,45(02):23.[doi:10.3969/j.issn.1001-8352.2016.05.005]
[4]王敏,龙源,钟明寿,等.乳化炸药线型切割器对薄壳弹药销毁效果的数值模拟研究[J].爆破器材,2018,47(02):39.[doi:10.3969/j.issn.1001-8352.2018.02.008]
　WANG Min,LONG Yuan,ZHONG Mingshou,et al.Numerical Simulation of Destruction Efficiency of Linear Shaped Charge Cutter with Emulsion Explosive on Thin Shell Ammunition[J].EXPLOSIVE MATERIALS,2018,47(02):39.[doi:10.3969/j.issn.1001-8352.2018.02.008]
[5]封雪松,冯博,赵娟,等.AP对RDX基含铝炸药爆轰性能影响研究[J].爆破器材,2019,48(05):46.[doi:10.3969/j.issn.1001-8352.2019.05.009]
　FENG Xuesong,FENG Bo,ZHAO Juan,et al.Effect of AP on Detonation Property of RDX-based Aluminized Explosive[J].EXPLOSIVE MATERIALS,2019,48(02):46.[doi:10.3969/j.issn.1001-8352.2019.05.009]
[6]赵娟,冯博,薛乐星,等.不同加载压力下HMX基含铝炸药的冲击起爆特性[J].爆破器材,2021,50(01):26.[doi:10.3969/j.issn.1001-8352.2021.01.005]
　ZHAO Juan,FENG Bo,XUE Lexing,et al.Shock Initiation Characteristics of HMX Based Aluminized Explosive under the Different Loading Pressure[J].EXPLOSIVE MATERIALS,2021,50(02):26.[doi:10.3969/j.issn.1001-8352.2021.01.005]
[7]黄炳耀,白桥栋,王茂杰,等.累积损伤对B炸药冲击起爆影响的仿真研究[J].爆破器材,2024,53(02):13.[doi:10.3969/j.issn.1001-8352.2024.02.003]
　HUANG Bingyao,BAI Qiaodong,WANG Maojie,et al.Simulation Study on the Effect of Cumulative Damage on the Shock Initiation of Composition B[J].EXPLOSIVE MATERIALS,2024,53(02):13.[doi:10.3969/j.issn.1001-8352.2024.02.003]

备注/Memo

备注/Memo:
收稿日期：2019-08-08
基金项目：国家自然科学基金青年项目（11602110）；江苏省研究生科研与实践创新计划项目(KYCX18_0471)
第一作者：戴国诚（1993－），男，硕士，主要从事高效毁伤与防护研究。E-mail：njustdgc@163.com
通信作者：贾鑫（1987－），男，硕导，副教授，主要从事高效毁伤与防护研究。E-mail：jiaxin@mail_njust.edu.cn
更新日期/Last Update: 2020-04-07