参考文献/References:
[1]杨帅,赵太勇,陈智刚,等.空心钨球侵彻性能的研究[J].爆破器材,2019,48(2):37-42.
YANG S,ZHAO T Y, CHEN Z G, et al.Study on penetration performance of hollow tungsten balls [J].Explosive Materials,2019,48(2):37-42.
[2]彭军,彭宝慧,孙兴昀,等.立方形钨破片穿甲效应的数值模拟与试验[J].爆破器材,2017,46(5):23-28.
PENG J, YUAN B H, SUN X Y, et al.Numerical simulation and experiment for penetrating performance of cubic tungsten fragment[J].Explosive Materials,2017,46(5):23-28.
[3]康爱花,陈智刚,付建平.球形破片侵彻高强度装甲钢的弹道极限速度计算[J].中北大学学报(自然科学版),2015,36(6):647-651.
KANG A H, CHEN Z G,FU J P. Calculation of ballistic limit velocity of spherical fragment to high hardness armor steel[J].Journal of North University of China(Natural Science Edition), 2015,36(6):647-651.
[4]贾光辉,张国伟,裴思行.钨球侵彻薄靶板的实验研究[J].兵工学报,1998,19(2):185-188.
JIA G H,ZHANG G W,PEI S X.Experiment study on tungsten spheres penetrate thin target[J]. Acta Armamentarii, 1998,19(2):185-188.
[5]赵晓旭,王树山,徐豫新,等.钨球高速侵彻低碳钢板成坑直径的计算模型[J].北京理工大学学报,2015,35(12):1217-1221.
ZHAO X X,WANG S S,XU Y X,et al. Crater diameter calculation model of tungsten sphere impacting low carbon steel plate at high velocity [J]. Transactions of Beijing Institute of Technology, 2015,35(12):1217-1221.
[6]陈志斌,刘志刚.球形弹垂直碰撞金属靶板的实验研究[J].弹道学报,1991(1):66-70.
CHEN Z B,LIU Z G. Experimental investigation on the metal target by normal impact of spherical shell[J]. Journal of Ballistics, 1991(1):66-70.
[7]朱文和,赵有守,李向东.球形破片侵彻有限厚靶板的模型建立与计算[J].弹道学报,1997(3):20-23.
?ZHU W H,ZHAO Y S,LI X D.A model and calculation for the penetration of spherical fragment to limited-thickness targets[J]. Journal of Ballistics, 1997(3):20-23.
[8]李金泉,黄德武,段占强,等.高速侵彻装甲钢绝热剪切带特性研究[J].弹道学报,2003,15(3):86-91.
?LI J Q, HUANG D W, DUAN Z Q, et al. The study of the properties of adiabatic shear bands in high strength armor steel under high velocity penetration[J]. Journal of Ballistics, 2003,15(3):86-91.
[9]张国伟,贾光辉,李庆.钨球在侵彻装甲钢板中的变形分析[J].华北工学院学报,1997,18(1):71-74.
?ZHANG G W, JIA G H, LI Q. The analysis of defor-mation of tungsten spheres in the impact test on armor plates[J].Journal of North China Institute of Technology, 1997,18(1):71-74.