参考文献/References:
[1]厉相宝, 杨云川,倪庆杰. 预控破片形成过程的数值模拟与分析[J]. 沈阳理工大学学报, 2009, 28(1): 37-40.
LI X B, YANG Y C,NI Q J. Numerical simulation and analysis of the formation of pre-formed fragments [J]. Transactions of Shenyang Ligong University, 2009, 28(1):37-40.
[2]TAYLOR G I. Fragmentation of tubular bombs [M]. London, UK: Cambridge University Press, 1963: 387-390.
[3]LI Y, WU W G, ZHU H Q, et al. The influence of different pre-formed holes on the dynamic response of square plate under air-blast loading [J]. Engineering Failure Analysis, 2017(78): 122-133.
[4]REID S R. Metal forming and impact mechanics: William Johnson commemorative volume [M]. London,UK: Pergamon Press, 2016: 303-323.
[5]郭策安, 周峰, 赵爽,等. 预控破片战斗部成型及速度衰减的影响研究[J]. 沈阳理工大学学报, 2018, 37(2): 56-62.
GUO C A, ZHOU F, ZHAO S,et al. Study on molding and velocity attenuation of prefabricated fragment warhead based on dimensional analysis[J]. Transactions of Shenyang Ligong University, 2018, 37(2): 56-62.
[6]张先峰, 赵有守, 陈惠武. 聚能射流引爆带壳炸药数值模拟研究[J]. 弾箭与制导学报, 2005, 25(4): 165-167.
ZHANG X F, ZHAO Y S, CHEN H W. Numerical simulation investigation of shaped charge jet initiating the shelled explosive [J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2005, 25(4): 165-167.
[7]张高峰, 李向东, 周兰伟,等. 对称刻槽预控破片战斗部壳体爆炸过程质量损失率研究[J]. 兵工学报, 2018, 39(2): 254-260.
ZHANG G F, LI X D, ZHOU L W,et al. Research on the explosion mass loss rate of pre-formed fragment warhead shell with symmetric groove[J]. Acta Armamentarii, 2018, 39(2): 254-260.
[8]刘桂峰, 张庆, 沈晓军, 等. 刻槽参数对破片形成的影响[J]. 弹道学报, 2014, 26(2): 63-66,85.
?LIU G F, ZHANG Q, SHEN X J, et al. Effect of groove parameters on formation of fragments [J]. Journal of Ballistics, 2014, 26(2): 63-66,85.
[9]赵海鸥. LS-DYNA动力分析指南[M].北京:兵器工业出版社, 2003:155-171.