[1]屈可朋,李亮亮,肖玮.高低温循环及对称冲击耦合加载下炸药的安全性研究[J].爆破器材,2019,48(04):43-46,53.[doi:10.3969/j.issn.1001-8352.2019.04.008]
　QU Kepeng,LI Liangliang,XIAO Wei.Safety of Explosive under High and Low Temperature Cycle and Coupling Loading of Symmetrical Colliding[J].EXPLOSIVE MATERIALS,2019,48(04):43-46,53.[doi:10.3969/j.issn.1001-8352.2019.04.008]
点击复制

高低温循环及对称冲击耦合加载下炸药的安全性研究()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
48
期数:
2019年04
页码:
43-46,53
栏目:
爆炸材料
出版日期:
2019-07-04

文章信息/Info

Title:
Safety of Explosive under High and Low Temperature Cycle and Coupling Loading of Symmetrical Colliding
文章编号:
5331
作者:
屈可朋; 李亮亮; 肖玮
西安近代化学研究所（陕西西安，710065）
Author(s):
QU Kepeng;  LI Liangliang;  XIAO Wei
Xi’an Modern Chemistry Research Institute (Shaanxi Xi’an, 710065)
关键词:
炸药; 安全性; 高低温循环试验; 对称碰撞试验
Keywords:
explosive;  safety;  high and low temperature cycle test;  symmetrical colliding test
分类号:
V512+.2
DOI:
10.3969/j.issn.1001-8352.2019.04.008
文献标志码:
A
摘要:
基于一级轻气炮加载装置，研究了高低温循环及对称冲击耦合加载下某黑索今(RDX)基含Al炸药的安全性，计算了缺陷处的内能等参数。结果表明：高低温循环后，炸药试样出现可见的孔隙。对称碰撞加载后，不经高低温循环的试样未发生点火，应力加载峰值为835 MPa，加载时间为35 μs；而经历高低温循环的试样出现点火，点火前应力为242 MPa，加载时间11 μs。高低温循环所产生的缺陷是导致炸药点火的重要原因。
Abstract:
Safety of RDX-based aluminized explosive under temperature cycle and coupling loading of symmetrical colliding was evaluated by one-stage light-gas gun experiment, and the parameters such as internal energy were calculated. Results show that it has appeared defects of explosive after temperature cycle experiment. Ignition of this explosive with defects occur under the conditions of symmetrical colliding, the loading stress is 242 MPa, and the loading time is 11 μs. While the ignition of explosive without defects will not occur under the same condition, the loading stress is 835 MPa, and the loading time is 35 μs. Defects caused by temperature cycle are the main reasons for ignition.

参考文献/References:

［1］田勇，张伟斌，温茂萍，等. JOB-9003高聚物粘结炸药热冲击损伤破坏相关性研究［J］.含能材料，2004,12(3):174-177.
TIAN Y, ZHANG W B, WEN M P, et al. Research on correlation of thermal shock damage of PBX JOB9003［J］. Chinese Journal of Energetic Materials, 2004,12(3):174-177.
［2］梁增友，黄风雷，张振宇. 损伤炸药的冲击起爆数值模拟［J］.北京理工大学学报，2006,26(12):1047-1051.
LIANG Z Y, HUANG F L, ZHANG Z Y. Numerical? simulation of damaged explosive in shock detonation［J］. Transactions of Beijing Institute of Technology, 2006,26(12):1047-1051.
［3］李德聪，陈力，丁雁生. 装药弹体侵彻混凝土厚靶中的炸药摩擦起爆模型［J］.爆炸与冲击,2009,29(1):13-17.
LI D C, CHEN L, DING Y S. A model of explosion induced by friction in the process of loaded projectiles penetrating into concrete targets［J］. Explosion and Shock Waves, 2009,29(1):13-17.
［4］林聪妹，刘佳辉，曾贵玉，等. 苯乙烯共聚物改性TATB基PBX的抗热冲击性能［J］.含能材料，2016,24(2):149-154.
?LIN C M, LIU J H, ZENG G Y, et al. Thermal shock resistance of styrene copolymer modified TATBbased polymer bonded explosive［J］. Chinese Journal of Energetic Materials, 2016,24(2):149-154.
［5］向梅，黄毅民，饶国宁，等. 不同升温速率下复合药柱烤燃实验与数值模拟研究［J］.爆炸与冲击，2013,33(4):394-400.
XIANG M, HUANG Y M, RAO G N, et al. Cook-off test and numerical simulation for composite charge at different heating rates［J］. Explosion and Shock Waves, 2013,33(4):394-400.
［6］王晨，陈朗，何乐，等. 低强度冲击下炸药点火的数值模拟［J］.火炸药学报，2012,35(2):44-48.
?WANG C, CHEN L, HE L, et al. Numerical simulation of explosive ignition under low impact loading［J］. Chinese Journal of Explosives and Propellants, 2012,35(2):44-48.
［7］李银成. 均匀炸药冲击起爆和起爆后的行为［J］.高压物理学报，2005,19(3):247-256.
LI Y C. Behaviors of initiation and after-initiation for homogeneous explosives［J］. Chinese Journal of High Pressure Physics, 2005,19(3):247-256.
［8］肖玮，李亮亮，屈可朋，等.某RDX基含Al炸药发射安全性［J］.含能材料.2015,23(1):62-66.
XIAO W, LI L L, QU K P, et al. Launch safety of RDX-based aluminized explosive［J］.Chinese Journal of Energetic Materials, 2015,23(1):62-66.
［9］瑞睿，李亮亮，屈可朋，等.一级轻气炮加载实验测试系统用于炸药装药发射安全性研究［J］.计测技术,2014,34(6):29-31,35.
RUI R, LI L L, QU K P, et al. Launch safety of explosives based on the one-stage light gas gun［J］. Metrology & Measurement Technology, 2014,34(6):29-31,35.
［10］FISHBURN B. Design modification and calibration of the picatinny activator for setback safety testing of SADARM:ADA251858［R］. 1992.
［11］傅献彩，沈文霞，姚天扬，等.物理化学［M］.北京：高等教育出版社，2005.
FU X C, SHEN W X, YAO T Y, et al. Physical chemistry［M］.Beijing: Higher Education Press,2005.
［12］郝志坚，王琪，杜世云.炸药理论［M］.北京：北京理工大学出版社，2015. HAO Z J, WANG Q, DU S Y. Explosive theory［M］.Beijing:Beijing Institute of Technology Press,2015.
［13］尚海林，赵锋，王文强，等.冲击作用下炸药热点形成的3维离散元模拟［J］.爆炸与冲击，2010,30(2)：131-137.
SHANG H L, ZHAO F, WANG W Q, et al. Three dimensional discrete element simulation of hot spots in explosives under shock loading［J］.Explosion and Shock Waves, 2010,30(2)：131-137.
［14］XU A G, PAN X F,ZHANG G C, et al.Material-point simulation of cavity collapse under shock［J］. Journal of Physics:Condensed Matter,2007(19):1-11.

相似文献/References:

[1]常新岩,郁刚,徐鸿儒,等.无源自动水喷淋系统[J].爆破器材,2010,39(01):29.
　CHANG Xinyan,YU Gang,XU Hongru,et al.Automatic Water Spray System without Power[J].EXPLOSIVE MATERIALS,2010,39(04):29.
[2]杨民刚.试论乳化机的乳化效果与安全性[J].爆破器材,2010,39(02):26.
　YANG Mingang.The Discussion on Emulsifying Effectiveness and Safety of Emulsion Machine[J].EXPLOSIVE MATERIALS,2010,39(04):26.
[3]陈中亿.工业炸药悬挂式轨道输送车系统的安全性研究[J].爆破器材,2010,39(05):34.
　CHEN Zhongyi.Study the Safety of Hanging Orbital Transport Vehicle System for Industrial Explosives[J].EXPLOSIVE MATERIALS,2010,39(04):34.
[4]解立峰,韩志伟,王海洋,等.民用炸药敏感度试验方法的研究与探讨[J].爆破器材,2011,40(02):8.
　XIE Lifeng,HAN Zhiwei,WANG Haiyang,et al.The Study of Sensitivity Testing Methods of Civil Explosives[J].EXPLOSIVE MATERIALS,2011,40(04):8.
[5]黄寅生,卢志坚.,卢光明.近年民用爆破器材专利特征分析[J].爆破器材,2009,38(05):22.
　HUANG Yinsheng,LU Zhijian.,LU Guangming.Analysis on Resent Patents of Industrial Explosive Materials[J].EXPLOSIVE MATERIALS,2009,38(04):22.
[6]陆明,张汉平,甘德淮,等.液混式膨化硝铵炸药生产安全性研究[J].爆破器材,2009,38(04):12.
　LU Ming,ZHANG Hanping,GAN Dehuai,et al.Study on the Productive Safety of Expanded Ammonia Nitrate Explosive with Liquid Mixing[J].EXPLOSIVE MATERIALS,2009,38(04):12.
[7]苏明阳.硝酸铵溶液运输和贮存过程的安全性研究[J].爆破器材,2009,38(04):36.
　SU Mingyang.Study on the Safety of Ammonium Nitrate Solution in Transportation and Storage[J].EXPLOSIVE MATERIALS,2009,38(04):36.
[8]常新岩,谢永言,郑永芬.工业炸药自动包装线的安全性探讨[J].爆破器材,2009,38(01):8.
　CHANG Xinyan,XIE Yongyan,ZHENG Yongfen.Discussion on Safety of Industrial Explosive Automatic Packing Line[J].EXPLOSIVE MATERIALS,2009,38(04):8.
[9]尹利,杨祖一.防止粉状工业炸药连续化生产发生燃烧爆炸事故的对策[J].爆破器材,2009,38(01):35.
　YIN Li,YANG Zuyi.Suggestions on Improving the Safety of the Continuous Production Technology of Powder Industrial Explosive[J].EXPLOSIVE MATERIALS,2009,38(04):35.
[10]罗海滔,胡炳成,吕春绪.膨化硝铵炸药生产专用凸轮粉碎机安全性研究[J].爆破器材,2011,40(03):14.
　LUO Haitao,HU Bingcheng,L Chunxu.Study on the Safety of CAM Crusher Used Specially for Expanded Ammonium Nitrate Explosive[J].EXPLOSIVE MATERIALS,2011,40(04):14.

备注/Memo

备注/Memo:
收稿日期：2019-02-26
基金项目：国家安全重大基础研究项目（号码省略）
第一作者：屈可朋（1983－），男，副研究员，主要从事弹药动态力学响应及安全性研究。E-mail:155301498@qq.com
更新日期/Last Update: 2019-07-04