[1]沈龙生,代骥,叶迎华,等.含能油墨配方设计及其在微孔装药中的应用[J].爆破器材,2015,44(05):1-4、9.[doi:doi:10.3969/j.issn.1001-8352.2015.05.001]
　SHEN Longsheng,DAI Ji,YE Yinghua,et al.Formulation Design of Energetic Ink and Its Application in Microporous Charge[J].EXPLOSIVE MATERIALS,2015,44(05):1-4、9.[doi:doi:10.3969/j.issn.1001-8352.2015.05.001]
点击复制

含能油墨配方设计及其在微孔装药中的应用()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
44
期数:
2015年05
页码:
1-4、9
栏目:
基础理论
出版日期:
2015-09-30

文章信息/Info

Title:
Formulation Design of Energetic Ink and Its Application in Microporous Charge
文章编号:
4928
作者:
沈龙生; 代骥; 叶迎华; 胡艳
南京理工大学化工学院（江苏南京，210094）
Author(s):
SHEN Longsheng;  DAI Ji;  YE Yinghua;  HU Yan
School of Chemical Engineering, Nanjing University of Science and Technology ( Jiangsu Nanjing, 210094)
关键词:
喷墨打印; 纳米Al/CuO; 含能油墨; 微装药
Keywords:
ink-jet printing;  nano Al/CuO;  energetic ink;  micro-charge
分类号:
TJ450；TQ038
DOI:
doi:10.3969/j.issn.1001-8352.2015.05.001
文献标志码:
A
摘要:
为优化微装药方法及设计合适的含能油墨配方，将喷墨打印装药和湿法压装两种装药方法结合起来，发现装药密度得到明显提高，装药均一性较好。采用激光点火方式，结合高速摄影和X射线衍射(XRD)等对微孔燃烧过程及其燃烧产物进行分析，获得了含能油墨中载体种类、纳米Al/CuO含量和Φ值对微孔燃烧的影响规律。发现硝化棉（NC）不但有很好的油墨性能、装药性能，而且点火燃烧性能良好。得到以下结论：载体为NC且质量分数为7.5%，Al/CuO的Φ值为1.6，初步测得最优配方下平均冲量约为145 μN?s。
Abstract:
In order to optimize micro-charge methods and design appropriate energetic ink formulations, two kinds of charge, the ink-jet printing and wet press charge, were combined. Charge density has been significantly improved and better charge uniformity was obtained. Combustion process and combustion products were analyzed and characterized by means of laser ignition combined with highspeed photography and Xray diffraction (XRD). The influences of carrier type, Nano Al/CuO content and Φ value of energetic ink to combustion were researched. Results show that NC has excellent properties with respect to ink performance, charge performance, ignition and combustion performances. NC is the preferred energetic ink suitable for acting as a carrier, and when the optimal carrier NC content is 7.5% and the optimal thermite Φ value is 1.6, the measured average impulse is 145 μN?s in this pharmaceutical formulations.

参考文献/References:

［1］尤政, 张高飞, 任大海. MEMS微推进技术的研究［J］. 纳米技术与精密工程, 2004, 2(2):98-105.
 You Zheng, Zhang Gaofei, Ren Dahai. Study on MEMS microthruster technology［J］. Nanotechnology and Precision Engineering, 2004, 2(2):98-105.
［2］London A P, Ayón A A, Epstein A H, et al. Microfabrication of a high pressure bipropellant rocket engine［J］. Sensors and Actuators A: Physical, 2001, 92(1-3):351-357.
［3］Khler J, Bejhed J, Kratz H, et al. A hybrid cold gas microthruster system for spacecraft［J］. Sensors and Actuators A:Physical, 2002, 97-98:587-598.
［4］Chaalane A, Rossi C, Estève D. The formulation and testing of new solid propellant mixture (DB+x%BP) for a new MEMSbased microthruster［J］. Sensors and Actuators A: Physical, 2007, 138(1):161-166.
［5］Ali A N, Son S F, Hiskey M A, et al. Novel high nitrogen propellant use in solid fuel micropropulsion［J］. Journal of Propulsion and Power, 2004, 20(1):120-126.
［6］Zhang K L, Chou S K, Ang S S. Development of a lowtemperature cofired ceramic solid propellant microthruster［J］. Journal of Micromechanics and Microengineering, 2005, 15(5): 944-952.
［7］Apperson S J, Bezmelnitsyn A V, Thiruvengadathan R, et al. Characterization of nanothermite material for solidfuel microthruster applications［J］. Journal of Propulsion and Power, 2009, 25(5): 1086-1091.
［8］何赞. 微推进器结构与制作工艺研究［D］. 南京：南京理工大学,2008.
［9］陈默. 基于MEMS的4×4微推进阵列制备及性能研究［D］. 南京：南京理工大学, 2010.
Chen Mo.Preparation of MEMSbased 4×4 microarray and performance study［D］.Nanjing:Nanjing University of Science and Technology, 2010.
［10］余协正. MEMS固体化学微推进阵列的设计、制作及其性能研究［D］. 南京：南京理工大学,2012.
［11］王成玲. MEMS数字固体微推进器的制备与性能研究［D］. 南京：南京理工大学,2014.
 Wang Chengling.Study on the fabrication and properties of MEMS digital solid micro thruster systerm［D］. Nanjing:Nanjing University of Science and Technology,2014.

相似文献/References:

[1]钱力,胡艳,吴立志,等.基于核壳结构Al/Cu2(NO3)(OH)3的喷墨打印含能油墨的制备与性能研究[J].爆破器材,2015,44(03):1.[doi:10.3969/j.issn.1001-8352.2015.03.001]
　QIAN Li,HU Yan,WU Lizhi,et al.Preparation and Characterization of Inkjet Printing Energetic Ink Based on the Core-shell Structured Al/Cu2(NO3)(OH)3 [J].EXPLOSIVE MATERIALS,2015,44(05):1.[doi:10.3969/j.issn.1001-8352.2015.03.001]

备注/Memo

备注/Memo:
收稿日期：2015-02-02
基金项目：江苏省自然科学基金青年基金项目（BK20140788）；预研基金项目（9140A05070114BQ02073）
作者简介：沈龙生（1989~），男，硕士，主要研究微推冲阵列装药研究。E-mail：sls18205141532@163.com
通信作者：叶迎华（1962~），女，博导，教授，主要从事MEMS火工品技术研究。E-mail：yyinghua@njust.edu.cn
更新日期/Last Update: 2015-09-29