[1]陶俊,王晓峰,陈松,等.一种CL-20基混合炸药等静压装药工艺安全性分析[J].爆破器材,2014,43(03):5-8.[doi:10.3969/j.issn.1001-8352.2014.03.002]
　TAO Jun,WANG Xiaofeng,CHEN Song,et al.Analysis for Isostatic Pressing Process Safety of a CL20 Based Composite Explosive[J].EXPLOSIVE MATERIALS,2014,43(03):5-8.[doi:10.3969/j.issn.1001-8352.2014.03.002]
点击复制

一种CL-20基混合炸药等静压装药工艺安全性分析()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
43
期数:
2014年03
页码:
5-8
栏目:
基础理论
出版日期:
2014-06-20

文章信息/Info

Title:
Analysis for Isostatic Pressing Process Safety of a CL20 Based Composite Explosive
文章编号:
4736
作者:
陶俊; 王晓峰; 陈松; 韩仲熙; 王彩玲; 贾宪振
西安近代化学研究所（陕西西安，710065）
Author(s):
TAO Jun;  WANG Xiaofeng;  CHEN Song;  HAN Zhongxi;  WANG Cailing;  JIA Xianzhen 
Xi’an Modern Chemistry Research Institute（Shaanxi Xi’an, 710065)
关键词:
CL-20基混合炸药; 工艺安全性; 等静压; 热爆炸
Keywords:
CL-20 based composite explosive;  process safety;  isostatic pressing;  thermal explosion
分类号:
TQ560.6
DOI:
10.3969/j.issn.1001-8352.2014.03.002
文献标志码:
A
摘要:
为确保炸药在等静压装药工艺过程中的安全性，对一种CL-20基混合炸药（GMD-15）的本质安全性及其与接触材质的相容性进行了分析；运用数值模拟、力学性能测试、热安全性能测试手段，重点分析了GMD-15等静压压制工艺过程中的受力安全性以及热安全性。数值模拟表明：140 MPa条件下，等静压压制药柱的温升为7 ℃，小于普通模压（29 ℃）；力学性能测试中以≥5 MPa/s的应力率对GMD-15药柱施加压应力，药柱没有发生爆炸或者燃烧；热安全性能测试中以1.5～2.0 ℃/min的升温速率对GMD-15药粉进行加热，190℃药粉方发生反应，将GMD-15药柱在108 ℃左右恒温3 h，未发生反应。分析认为，等静压压制GMD-15工艺过程安全，不会导致炸药发生热爆炸。
Abstract:
In order to ensure isostatic pressing process safety during the explosives charge, the inherent safety of a CL-20 based composite explosive (GMD-15) and the compatibility between GMD-15 and the contacted media have been analyzed. Numerical simulation, mechanical testing and thermal safety performance testing have been performed to analyze the force safety and thermal safety in the isostatic pressing charging process. Numerical simulation results show that under 140 MPa isostatic pressing the GMD-15 grain temperature rises 7 ℃, which is less than in normal pressing process (29 ℃). In mechanical properties test, applying stress rate larger than 5 MPa/s to GMD-15 grain prevented it from exploding or burning. In thermal safety performance test, with the heating rate of 1.5～2.0 ℃/min, GMD-15 powder started with the reaction at 190 ℃, while when GMD-15 grain was maintained at 108 ℃ for 3 h, no reaction happens. In conclusion, the isostatic pressing process of GMD-15 is safe and would not lead to the occurrence of thermal explosion.

参考文献/References:

［1］王淑萍.分步压装装药的安全性分析［J］.火炸药学报，2006，29（2）：23-25.
Wang Shuping.The safety analysis of the steppressloading Charges［J］.Chinese Journal of Explosives & Propellants, 2006, 29(2): 23-25.
［2］Dobratz B M, Crawford P C. LLNL explosive bandbook properties of chemical explosive simulants［R］.UCRL52997Chg.2.
［3］温茂萍，李明，庞海燕，等.炸药力学性能各向同异性试验研究［J］.含能材料，2006，14（4）：286-289.
 Wen Maoping, Li Ming, Pang Haiyan, et al. Study on mechanical isotropic of PBX［J］.Chinese Journal of Energetic Materials, 2006, 14(4): 286-289.
［4］孙建. 等静压炸药装药技术发展与应用［J］.含能材料，2012，20（5）：638-642.
Sun Jian. Development of isostatic pressing technology of explosive charge［J］.Chinese Journal of Energetic Materials, 2012, 20(5): 638-642. 
［5］温茂萍，庞海燕，敬仕明，等.等静压与模压JOB9003炸药力学性能比较研究［J］.含能材料，2004，12（6）：338-341.
Wen Maoping, Pang Haiyan, Jing Shiming, et al. Comparative study on mechanical properties of two kinds of JOB9003 shaped seperately by isostatic liquid pressing and mould pressing［J］.Energetic Materials, 2004, 12(6): 338-341.
［6］梁华琼，韩超，雍炼，等.高聚物黏结粉末橡胶等静压净成型技术［J］.含能材料，2011,19（3）：325-329.
Liang Huaqiong, Han Chao, Yong Lian, et al. Net shaping technology of polymerbonded powder by rubber isostatic pressing［J］. Chinese Journal of Energetic Materials, 2011, 19(3): 325-329. 
［7］闫昭君.HNS炸药压装工艺安全性分析［J］.兵工自动化，2011，30（5）：68-71.
Yan Zhaojun. Security analysis for HNS explosive pressure charging technology［J］.Ordnance Industry Automation, 2012, 30(5): 68-71.
［8］韩小平，张元冲，沈亚鹏，等. 快速加载下TNT材料中绝热剪切带的细观研究 ［J］.实验力学，1995，10（2）：125-132.
Han Xiaoping, Zhang Yuanchong, Shen Yapeng, et al. Microscopic study of adiabatic shear bands of TNT materials under fast loading［J］.Journal of Experimental Mechanics, 1995, 10(2):125-132.
［9］ 金大勇，贾宪振，王亲会，等.RTHLDu1炸药注装工艺安全性分析［J］.火工品，2011（6）：41-46.
 Jin Dayong, Jia Xianzhen, Wang Qinhui, et al. Security analysis for RTHLDu1 explosive casting technology［J］.Initiators & Pyrotechnics, 2011（6）: 41-46.

相似文献/References:

[1]金大勇①,王亲会①,蒋秋黎①,等.一种DNAN基熔铸炸药压滤装药工艺安全性分析[J].爆破器材,2015,44(03):16.[doi:10.3969/j.issn.1001-8352.2015.03.004]
　JIN Dayong,WANG Qinhui,JIANG Qiuli,et al.Safety Analysis for Filter Press Process of a DNAN Based Meltcast Explosive[J].EXPLOSIVE MATERIALS,2015,44(03):16.[doi:10.3969/j.issn.1001-8352.2015.03.004]

备注/Memo

备注/Memo:
收稿日期：2013-11-15 
基金项目：国防科工委基础产品创新计划火炸药科研专项
作者简介：陶俊（1987~），硕士，主要从事混合炸药研究。E-mail：taojun4712230@126.com
更新日期/Last Update: 2014-06-11