[1]顾文彬,胡亚峰,刘建青,等.基于等质量变壁厚球缺罩聚能杆式射流成型特性研究[J].爆破器材,2013,42(04):14-19.[doi:10.3969/j.issn.1001-8352.2013.04.004]
　GU Wenbin,HU Yafeng,LIU Jianqing,et al.Characteristic study on jetting projectile charge formation of variable thickness sphere liner based on equi-mass[J].EXPLOSIVE MATERIALS,2013,42(04):14-19.[doi:10.3969/j.issn.1001-8352.2013.04.004]
点击复制

基于等质量变壁厚球缺罩聚能杆式射流成型特性研究()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
42
期数:
2013年04
页码:
14-19
栏目:
基础理论
出版日期:
2013-08-20

文章信息/Info

Title:
Characteristic study on jetting projectile charge formation of variable thickness sphere liner based on equi-mass
文章编号:
4610
作者:
顾文彬; 胡亚峰; 刘建青; 徐浩铭; 秦入平; 王振雄 
中国人民解放军理工大学(江苏南京，210007)
Author(s):
GU Wenbin;  HU Yafeng;  LIU Jianqing;  XU Haoming;  QIN Ruping;  WANG Zhenxiong
PLA University of Science and Technology (Jiangsu Nanjing, 210007)
关键词:
变壁厚球缺罩; 杆式射流; 数值模拟
Keywords:
variable thickness sphere liner;  jetting projectile charge (JPC);  numerical simulation
分类号:
TP69 O383
DOI:
10.3969/j.issn.1001-8352.2013.04.004
文献标志码:
A
摘要:
基于变壁厚球缺罩质量恒定假设，通过改变药型罩内表面曲率半径rx和罩顶厚度s，调整药型罩的结构，建立了δs与rx设计参数计算模型；采用LS-DYNA3D显式非线性动力有限元程序，对不同结构变壁厚球缺罩形成聚能杆式射流的过程进行三维数值模拟；设计出罩顶厚度改变量δs在(－1.2～+1.2)mm范围内的7种不同结构变壁厚球缺罩方案，研究其形成聚能杆式射流的形态和各项性能参数的变化规律，并与等壁厚药型罩形成的聚能杆式射流参数进行对比分析。研究结果表明：变壁厚球缺罩对杆式射流的形状、长度、密实度和断裂时间等性能参数均有较显著影响；当δs=－0.4mm时，杆式射流头部速度为3317m/s，并且速度梯度分布合理，杆式射流的综合性能较优。
Abstract:
Based on the assumption of keeping the mass of variable thickness sphere liner unchanged, calculation model of design parameters δs and rx was established by changing the curvature radius of inner surface rx and the liner top thickness s and adjusting the structure of liner. LSDYNA explicit nonliner dynamic Finite Element Analysis (FEA) program was used to 3D numerically simulate the full process of jetting projectile charge (JPC) formation of variable thickness sphere liner with different structure. Seven different structures of variable thickness sphere liners, whose top thickness variation δs was at the range of(－1.2 -+1.2)mm, were designed. Their Jetting projectile charge formation and change laws of performance parameters were studied and compared with even thickness sphere different structure liner. Results show that the variable thickness sphere liner have significant influence on the shape, length, compactness and break up time of jetting projectile charge. The head velocity of jetting projectile charge is 3317m/s when δs=－0.4mm. The distribution of velocity gradient is reasonable, and the jetting projectile charge has a better comprehensive performance.

参考文献/References:

［1］李成兵，裴明敬，沈兆武. 高速杆式弹丸三维数值模拟 ［J］. 高压物理学报, 2007,21(2):165-172.
Li Chengbing, Pei Mingjing, Shen Zhaowu.Three dimensional numerical simulation of the high velocity rodshaped projectile ［J］. Chinese Journal of High Pressure Physics, 2007,21(2):165-172.
［2］廖海平，黄正祥，张先锋，等. 亚半球罩聚能装药的杆式射流特性研究 ［J］. 弹箭与制导学报, 2008,28(6):91-94.
 Liao Haiping, Huang Zhengxiang, Zhang Xianfeng, et al. Rodlike jet properties of semispherical liner shaped charge ［J］. Journal of Projectiles, Rockets, Missiles and Guidance, 2008,28(6):91-94. 
［3］吴有龙，李伟兵，王晓鸣,等. 壳体厚度对聚能杆式侵彻体成型的影响 ［J］. 火工品, 2010(2):29-31.
Wu Youlong, Li Weibing, Wang Xiaoming, et al. The effect of shell thickness on formation of jetting projectile charge ［J］ Initiators & Pyrotechnics, 2010(2):29-31.
［4］顾文彬，刘建青，唐勇，等．球缺型EFP战斗部结构优化设计研究［J］．南京理工大学学报:自然科学版，2008,32(2)：165-170．
Gu Wenbin, Liu Jianqing, Tang Yong, et al. Optimizing design of EFP warhead with hemispherical liner ［J］. Journal of Nanjing University of Science and Technology:Natural Science, 2008,32(2):165-170．
［5］白金泽，LSDYNA3D理论基础与实例分析［M］.北京：科学出版社, 2005.
［6］吴晗玲，段卓平，汪永庆. 杆式射流形成的数值模拟研究 ［J］. 爆炸与冲击, 2006,26(4):328-332.
Wu Hanling, Duan Zhuoping, Wang Yongqing. Simulation investigation of rodlike jets ［J］. Explosion and Shock Waves, 2006,26(4):328-332. 
［7］李成兵，沈兆武，裴明敬. 高速杆式弹丸初步研究 ［J］. 含能材料, 2007,15(3):248-252.
 Li Chengbing, Shen Zhaowu, Pei Mingjing. Preliminary study of high velocity rodshaped projectile ［J］. Chinese Journal of Energetic Materials, 2007,15(3):248-252. 
［8］刘建青，顾文彬，唐勇,等. 变壁厚球缺罩爆炸成型弹丸成型性能的数值模拟 ［J］. 解放军理工大学学报:自然科学版, 2008,9(2):172-176.
Liu Jianqing, Gu Wenbin, Tang Yong, et al. Numerical investigation on EFP forming performance with variationalwallthickness hemispherical liner［J］.Journal of PLA University of Science and Technology:Natural Science,2008,9 (2):172-176．
［9］时党勇，李裕春，张胜民.基于ANSYS/LS DYNA 8.1进行显式动力分析［M］.北京:清华大学出版社，2004.
［10］北京工业学院八系，爆炸及其作用编写组.爆炸及其作用,下册［M］.北京：国防工业出版社，1979.
［11］黄正祥，张先锋，陈惠武.起爆方式对聚能杆式侵彻体成型的影响［J］.兵工学报，2004，25（3）：289-291.
Huang Zhengxiang,Zhang Xianfeng,Chen Huiwu. Influence of modes of detonation on the mechanism of jetting projectile charge ［J］.Acta Armamentarii, 2004,25（3）：289-291.

相似文献/References:

[1]张钧①,陈智刚①,李小军②,等.变壁厚球缺罩杆式射流的形成与侵彻性能研究[J].爆破器材,2016,45(01):39.[doi:10.3969/j.issn.1001-8352.2016.01.009]
　ZHANG Jun,CHEN Zhigang,LI Xiaojun,et al.Formation and Penetration Performances of Jetting Penetrator Charge of Hemispherical Liners with Variable Thickness[J].EXPLOSIVE MATERIALS,2016,45(04):39.[doi:10.3969/j.issn.1001-8352.2016.01.009]
[2]成乐乐①,赵太勇①,陈智刚①,等.分层装药对杆式射流的影响分析[J].爆破器材,2018,47(04):35.[doi:10.3969/j.issn.1001-8352.2018.04.006]
　CHENG Lele,ZHAO Taiyong,CHEN Zhigang,et al.Influence of Layered Charge on Jetting Projectile Charge[J].EXPLOSIVE MATERIALS,2018,47(04):35.[doi:10.3969/j.issn.1001-8352.2018.04.006]
[3]张春辉①,张斐①②,王志军②,等.复合材质杆式射流侵彻水下目标的数值模拟[J].爆破器材,2019,48(01):8.[doi:10.3969/j.issn.1001-8352.2019.01.002]
　ZHANG Chunhui,ZHANG Fei,WANG Zhijun,et al.Numerical Simulation of Composite-material Rod-like Jet Penetrating Underwater Targets[J].EXPLOSIVE MATERIALS,2019,48(04):8.[doi:10.3969/j.issn.1001-8352.2019.01.002]

备注/Memo

备注/Memo:
收稿日期：2013-03-14
基金项目：国家科技支撑计划项目（2012BAK05B01）
作者简介：顾文彬(1961~)，男，教授，博导，主要从事火炮、自动武器与弹药工程的研究。E-mail:guwenbin1@yahoo.com.cn
通信作者：胡亚峰(1988~)，男，硕士，主要从事火炮、自动武器与弹药工程的研究。E-mail:827734300@qq.com
更新日期/Last Update: 2013-08-25