[1]徐志祥,叶志文,刘大斌,等.乳胶基质流动模型及其温度和速度的分布研究[J].爆破器材,2009,38(02):5-7.
　XU zhixiang,YE zhiwen,LIU Dabin,et al.Study on Flow Model and Distribution of Temperature and Pressure of Emulsion Matrix[J].EXPLOSIVE MATERIALS,2009,38(02):5-7.
点击复制

乳胶基质流动模型及其温度和速度的分布研究()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
38
期数:
2009年02
页码:
5-7
栏目:
基础理论
出版日期:
2009-04-20

文章信息/Info

Title:
Study on Flow Model and Distribution of Temperature and Pressure of Emulsion Matrix
文章编号:
4152
作者:
徐志祥; 叶志文; 刘大斌; 胡毅亭; 卫延安
（南京理工大学，江苏南京210094）
Author(s):
XU zhixiang;  YE zhiwen;  LIU Dabin;  HU Yiting;  WEI Yan’an
Nanjing University of Science and Technology (Jiangsu Nanjing，210094)
关键词:
乳胶基质; 粘度; 非牛顿流体
Keywords:
emulsion matrix;  viscosity;  non-newtonian fluid
分类号:
T235.21
文献标志码:
A
摘要:
文章首先对乳胶基质的流动模型进行了确认，试验结果表明乳胶基质的流动属于bingham流体；结合非牛顿流体的动量和能量方程，依据边界条件得出乳胶基质的速度和温度的方程表达式，为乳化炸药基础理论研究和乳化炸药的生产设备的制造提供参考。
Abstract:
The flow model of emulsion matrix is confirmed by the experiment results in this paper， which is showed to be bingham fluid. Combining momentum and energy equations of nonnewtonian fluid， temperature and velocity distribution equations of emulsion matrix will be obtained according to boundary conditions， which offer a reference for the basic theory research and equipment production of emulsion explosive.

参考文献/References:

［1］竹内文雄［日］.乳化炸药［J］.工业火药，1982，43（5）：285~293.［2］R. V. Cartwright.Rheology of Emulsion Explosives:a practical method［J］. Propellants， Explosives，Pyrotechnics， 1989，14(5)：215~218.［3］Alexander Y， Malkin et al. Effect of Droplet Size on the Rheological Properties of Highly-concentrated W/O Emulsions［J］.Rheol Acta，2004，43(6)：584~591.［4］杨仁树，李清仁，等.乳化炸药异常流变性与其微观稳定性的关系［J］. 煤炭学报，1997，22（2）：160~164.［5］周向群，郑峰.乳化炸药流变特性的测试［J］. 测试技术学报， 1998，12（4）：23~27.［6］徐佩弦，等. 高聚物流变学及其应用［M］. 北京：化学工业出版社，2003.

相似文献/References:

[1]杨长青,王有会.浅谈影响乳胶基质物理敏化密度的因素[J].爆破器材,2011,40(02):20.
　YANG Changqing,WANG Youhui.Brief Discussion on the Factors Affecting Physical Sensitization Density of Emulsion Matrix[J].EXPLOSIVE MATERIALS,2011,40(02):20.
[2]王有会,赵博.专用油相对乳化炸药生产过程的影响[J].爆破器材,2009,38(02):13.
　WANG Youhui,ZHAO Bo.Influence of the Specialpurpose Oil Phase to the Production Process of Emulsion Explosive[J].EXPLOSIVE MATERIALS,2009,38(02):13.
[3]陈飞,邢光武,甘德淮,等.敞开式无动力冷却器的研制[J].爆破器材,2011,40(04):12.
　CHEN Fei,XING Guangwu,GAN Dehuai,et al.Development of Open Unpowered Cooler[J].EXPLOSIVE MATERIALS,2011,40(02):12.
[4]陈飞,邢光武,江志华,等.多元易发泡型复合乳化剂乳化炸药的制备[J].爆破器材,2011,40(06):23.
　CHEN Fei,XING Guangwu,JIANG Zhihua,et al.Preparation of Emulsion Explosive Containing Multielement Foaming Composite Emulsifying Agent[J].EXPLOSIVE MATERIALS,2011,40(02):23.
[5]开俊俊,申卫峰,雷鹏灿,等.乳胶基质微乳液低温快速发泡技术的研究[J].爆破器材,2013,42(02):31.[doi:10.3969/j.issn.1001-8352.2013.02.008]
　KAI Junjun,SHEN Weifeng,LEI Pengcan,et al.Research on the Low Temperature Rapid Foaming Technology of Microemulsion for Emulsion Matrix[J].EXPLOSIVE MATERIALS,2013,42(02):31.[doi:10.3969/j.issn.1001-8352.2013.02.008]
[6]迟洪鹏,李鑫,查正清,等.乳胶基质运输车储存罐体及输送系统设计[J].爆破器材,2015,44(01):28.[doi:10.3969/j.issn.10018352.2015.01.007]
　CHI Hongpeng,LI Xin,ZHA Zhengqing,et al.Design of Storage Tank and Conveying System of Emulsion Matrix Truck[J].EXPLOSIVE MATERIALS,2015,44(02):28.[doi:10.3969/j.issn.10018352.2015.01.007]
[7]宋力骞,叶志文,徐乾.优质失水山梨醇倍半油酸酯的合成[J].爆破器材,2015,44(04):24.[doi:10.3969/j.issn.1001-8352.2015.04.006]
　SONG Liqian,YE Zhiwen,XU Qian.Synthesis of High Quality Sorbitan Sesquioleate[J].EXPLOSIVE MATERIALS,2015,44(02):24.[doi:10.3969/j.issn.1001-8352.2015.04.006]
[8]吴鹏①,刘静平①②,陈相③,等.温度冲击对车载乳胶基质安全性的影响[J].爆破器材,2016,45(01):56.[doi:10.3969/j.issn.1001-8352.2016.01.013]
　WU Peng,LIU Jingping,CHEN Xiang,et al.Effect of Temperature Shock on the Safety of Vehicle Emulsion Matrix[J].EXPLOSIVE MATERIALS,2016,45(02):56.[doi:10.3969/j.issn.1001-8352.2016.01.013]
[9]綦海军,明刚,刘再强,等.乳胶基质管路的压力降研究与安全性分析[J].爆破器材,2016,45(02):47.[doi:10.3969/j.issn.1001-8352.2016.02.012]
　QI Haijun,MING Gang,LIU Zaiqiang,et al.Research on Pressure Drop and Safety in Transport Pipes of Emulsion Matrix[J].EXPLOSIVE MATERIALS,2016,45(02):47.[doi:10.3969/j.issn.1001-8352.2016.02.012]
[10]张小勇,周宇,杨敏会,等.30 t级乳胶基质配送车的设计研究[J].爆破器材,2018,47(01):37.[doi:10.3969/j.issn.1001-8352.2018.01.007]
　ZHANG Xiaoyong,ZHOU Yu,YANG Minhui,et al.Design and Research of an Emulsion Matrix Delivery Vehicle with the Capacity of 30 Tons[J].EXPLOSIVE MATERIALS,2018,47(02):37.[doi:10.3969/j.issn.1001-8352.2018.01.007]

备注/Memo

备注/Memo:
收稿日期：2008-11-21作者简介：徐志祥(1982~)，男，博士，主要从事工业炸药配方及安全性研究。
更新日期/Last Update: 2011-05-24