[1]李金明,丁玉奎,可勇.利用聚能原理销毁危险弹药的试验方法[J].爆破器材,2008,37(03):37-39.
　Li Jinming,Ding Yukui,Ke Yong.The Test Method of Disposing Danger Ammuniti on by Using Gather Energy Theory[J].EXPLOSIVE MATERIALS,2008,37(03):37-39.
点击复制

利用聚能原理销毁危险弹药的试验方法()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
37
期数:
2008年03
页码:
37-39
栏目:
出版日期:
2008-06-20

文章信息/Info

Title:
The Test Method of Disposing Danger Ammuniti on by Using Gather Energy Theory
文章编号:
4079
作者:
李金明; 丁玉奎; 可勇
中国人民解放军军械工程学院 (河北石家庄，050003)
Author(s):
Li Jinming;  Ding Yukui;  Ke Yong
Ammunition Engineering Department of Ordnance Engineering College PLA(Hebei Shij iazhuang 050003 )
关键词:
处理; 爆破; 聚能装药; 危险弹药
Keywords:
disposal;  dismantle;  gather energy load dynamite; danger ammu nition
分类号:
TD235.22
文献标志码:
A
摘要:
传统的爆破方法处理射击未爆弹、事故弹药、地雷等危险弹药存在操作安全隐患，文章分析了锥形装药爆破作用原理和效能，通过试验验证了锥形装药能够可靠穿透并引爆榴弹弹丸，设计出聚能引爆器装置，从而避免了作业人员处理弹药过程中与危险弹药的直接接触，提高了操作的安全性。
Abstract:
The potential safe ty problem exists using conventional dynamite method in disposal of unexplosive ammo， accident ammo， and landmine． This paper analyzes the function principle and efficiency of taper load dynamite． Tests validate that taper load dynamite can credibly penetrate and detonate shrapnel pill． Gather energy ignite devic e is schemed out to avoid direct contact with danger ammunition and increase the safety of treatment process．

参考文献/References:

［1］孙业斌．爆炸作用与装药设计［M］．北京:国防工业出版社，1987．25 ～28．
［2］朱爱华．用导爆索和射孔弹销毁废旧军事弹药［J］．爆破，2004，（9）：75～76．
［3］《爆炸及其作用》编写组．爆炸及其作用［M］．北京:国防工业出版社 ,1979． 84～86．

相似文献/References:

[1]郑思友,翟廷海.工业雷管可靠起爆塑料导爆管试验研究[J].爆破器材,2010,39(02):29.
　ZHENG Siyou,Experimental Study on Detonating Plastic Nonel Tube Reliably by Industrial Detonator[J].EXPLOSIVE MATERIALS,2010,39(03):29.
[2]朱朝祥,吴岩,蔡伟,等.高温热凝结构爆破处理方法的探讨[J].爆破器材,2009,38(05):34.
　ZHU Chaoxiang,WU Yan,CAI Wei,et al.The Discussion of High Temperature Coagulum Processing Method by Demolition[J].EXPLOSIVE MATERIALS,2009,38(03):34.
[3]宋克健,龙源,胡新印,等.装药结构对药孔爆破初始压力及能量利用率的影响[J].爆破器材,2011,40(03):1.
　SONG Kejian,LONG Yuan,HU Xinyin,et al.The Influence of Charge Construction on the Initial Shock Pressure and the Utilization Ratio of Energy[J].EXPLOSIVE MATERIALS,2011,40(03):1.
[4]吕小师,王春玲,李高峰.锅炉炉膛结焦清除中的外部快速装药爆破技术[J].爆破器材,2011,40(04):19.
　L Xiaoshi,WANG Chunling,LI Gaofeng.External Fast Charge Blasting Techniques in Clearing Coking of Furnace Chamber[J].EXPLOSIVE MATERIALS,2011,40(03):19.
[5]王毅,杨军,徐振洋,等.RTK技术在露天矿布孔中的应用研究[J].爆破器材,2013,42(06):38.[doi:10.3969/j.issn.1001-8352.2013.06.008]
　WANG Yi,YANG Jun,XU Zhenyang,et al.Application Research of RTK in Open-pit Mine Hole Arrangement[J].EXPLOSIVE MATERIALS,2013,42(03):38.[doi:10.3969/j.issn.1001-8352.2013.06.008]
[6]宋日,郭占江,王丽杰.非洲AEL公司乳化炸药现场混制和装药技术分析[J].爆破器材,2008,37(04):11.
　Song Ri,Guo Zhanjiang,Wang Lijie.Analysis of Emulsion Explosive On-site Mixing and Loading Technology of African Explosives Limited (AEL)[J].EXPLOSIVE MATERIALS,2008,37(03):11.
[7]于妍宁,徐振洋,郭连军,等.岩石动态特性对爆破振动能量分布的影响[J].爆破器材,2015,44(06):15.[doi:10.3969/j.issn.1001-8352.2015.06.004]
　YU Yanning,XU Zhenyang,GUO Lianjun,et al.Influence of Rock Dynamic Characteristics on Distribution of Blasting Vibration[J].EXPLOSIVE MATERIALS,2015,44(03):15.[doi:10.3969/j.issn.1001-8352.2015.06.004]
[8]赵春生①,费鸿禄②,胡刚②.循环爆破作用下岩体的不同步累积损伤测试方法[J].爆破器材,2019,48(02):57.[doi:10.3969/j.issn.1001-8352.2019.02.011]
　ZHAO Chunsheng,FEI Honglu,HU Gang.Asynchronous Accumulative Damage Testing Method of Rock under Cyclic Blasting[J].EXPLOSIVE MATERIALS,2019,48(03):57.[doi:10.3969/j.issn.1001-8352.2019.02.011]
[9]陈资,李昌.基于KPCA-WOA-ELM的爆破飞石距离预测[J].爆破器材,2022,51(02):47.[doi:10.3969/j.issn.1001-8352.2022.02.008]
　CHEN Zi,LI Chang.Prediction of Blasting Flyrock Distance Based on KPCA-WOA-ELM[J].EXPLOSIVE MATERIALS,2022,51(03):47.[doi:10.3969/j.issn.1001-8352.2022.02.008]
[10]胡刚①,费鸿禄①,郭玉新②,等.爆破作用下影响矿柱稳定性的多因素联合分析[J].爆破器材,2023,52(04):58.[doi:10.3969/j.issn.1001-8352.2023.04.009]
　HU Gang,FEI Honglu,GUO Yuxin,et al.Combined Analysis of Multiple Factors Affecting the Stability of Pillars under Blasting Loads[J].EXPLOSIVE MATERIALS,2023,52(03):58.[doi:10.3969/j.issn.1001-8352.2023.04.009]

更新日期/Last Update: 2015-05-29