[1]史长根,尤峻.双立式爆炸焊接新方法[J].爆破器材,2008,37(03):28-30.
　Shi Changgen,You Jun.New Technology of Double Vertical Explosive Welding[J].EXPLOSIVE MATERIALS,2008,37(03):28-30.
点击复制

双立式爆炸焊接新方法()
分享到：

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
37
期数:
2008年03
页码:
28-30
栏目:
安全与测试
出版日期:
2008-06-20

文章信息/Info

Title:
New Technology of Double Vertical Explosive Welding
文章编号:
4076
作者:
史长根; 尤峻
解放军理工大学工程兵工程学院（江苏南京，210007）
Author(s):
Shi Changgen;  You Jun
Engineering Institute of Engineering Corps，PLAUST (Jiangsu　Nanjing，210 007)
关键词:
爆炸焊接; 双立法; 装药量; 冲击波
Keywords:
ｅxplosive welding;  double vertical ; explosive charge; shock w ave
分类号:
TG456.6；O389
文献标志码:
A
摘要:
为了削减爆炸冲击波和节省装药量，该文通过试验发明了一种新的爆炸焊接方法——双立法。实验和初步的生产表明，相对于现行的平行式爆炸焊接方法，双立式爆炸焊接方法明显具有如下几个优点：由于充分利用了平行法上方耗散的冲击波，从而节省了至少1/2的装药量，大大降低了生产成本；双立式爆炸焊接方法采用的是封闭式装药，因此待复合的双侧复合板削减了爆炸冲击波对周围环境的不利影响；爆炸焊接工艺参数易于精确控制；爆炸焊接作业易于形成标准的工艺流程。
Abstract:
To reduce the shock wave and save the explosive charge， the paper invents a new method of double vertical explosive welding by experiment． The experiment and initial production prove that there are several clear advantages． At least half of the explosive charge is saved because the dissipative energy of the shock wa ve is used in the parallel explosive welding and production cost are reduced gre atly． The cladding plates of both sides also reduce the disadvantage effect of shock wave on environment in the new technology． It is easy to control the tech nology parameters．

参考文献/References:

［1］郑远谋．爆炸焊接及金属复合材料［M］．长沙：中南工业大学出版社， 2001．38～39．
［2］史长根，王耀华，李子全．1Cr18Ni9Ti20G爆炸焊接+轧制工艺研究［J］．材料科学与工艺，2004，12 (2)：193～198．
［3］史长根．双立式爆炸焊接装置及其方法［P］．中国发明专利：200610096800．3． 2007，4．
［4］郑哲敏,杨振声． 爆炸加工［M］．北京：国防工业出版社，1981．127 ．
［5］中国力学学会工程爆破专业委员会．爆破工程［M］．北京：冶金工业出版社，1996．79～81．

相似文献/References:

[1]史长根,康丽霞,蒋国良.爆炸焊接两板安全间距分析和试验研究[J].爆破器材,2010,39(03):33.
　SHI Changgen,KANG Lixia,JIANG Guoliang.Analysis and Experimental Study of Safe Space between Two Plates in Explosive Welding[J].EXPLOSIVE MATERIALS,2010,39(03):33.
[2]史长根,冯叔瑜,史和生,等.3Cr13Mo-42CrMo高耐磨耐蚀爆炸焊接复合轧辊试验研究[J].爆破器材,2010,39(05):28.
　SHI Changgen,FENG Shuyu,SHI Hesheng,et al.Trial Study of High Wear-resisting and Acid-resisting Cladding Rolling of 3Cr13Mo-42CrMo in Explosive Welding[J].EXPLOSIVE MATERIALS,2010,39(03):28.
[3]史长根,洪津,蒋国良,等.爆炸焊接危害机理分析[J].爆破器材,2009,38(03):28.
　SHI Changgen,HONG Jin,JIANG Guoliang,et al.Harm Mechanism Analysis of Explosive Welding[J].EXPLOSIVE MATERIALS,2009,38(03):28.
[4]刘鹏,陆明,史长根,等.爆炸焊接最佳药量窗口及其参数的确定[J].爆破器材,2011,40(03):35.
　LIU Peng,LU Ming,SHI Changgen,et al.Research on Optimum Charge Window in Explosive Welding[J].EXPLOSIVE MATERIALS,2011,40(03):35.
[5]唐文龙①,饶国宁①,周景蓉②,等.SUS304不锈钢/Q345R碳钢爆炸焊接工艺参数研究[J].爆破器材,2012,41(05):29.
　TANG Wenlong,RAO Guoning,ZHOU Jingrong,et al.Study on the Parameters in SUS304 Stainless Steel/Q345R Carbon Steel Explosive Welding Process[J].EXPLOSIVE MATERIALS,2012,41(03):29.
[6]孙光,熊代余,龚兵,等.粉状铵油炸药现场混装车的设计与应用[J].爆破器材,2013,42(05):27.[doi:10.3969/j.issn.1001-8352.2013.05.006]
　SUN Guang,XIONG Daiyu,GONG Bing,et al.Design and Application of Powdery Ammonium Nitrate Fuel Oil Explosive on Site Mixed Loading Truck[J].EXPLOSIVE MATERIALS,2013,42(03):27.[doi:10.3969/j.issn.1001-8352.2013.05.006]
[7]王宇新①,李晓杰①,王小红①,等.基于爆炸焊接技术对磨损失效轧辊的修复研究[J].爆破器材,2018,47(06):8.[doi:10.3969/j.issn.1001-8352.2018.06.002]
　WANG Yuxin,LI Xiaojie,WANG Xiaohong,et al.Study on Repair of Worn Roller Using Explosive Welding Technology[J].EXPLOSIVE MATERIALS,2018,47(03):8.[doi:10.3969/j.issn.1001-8352.2018.06.002]
[8]朱福元①,郭子如②,张仲一②,等.一种平板状爆炸焊接用炸药[J].爆破器材,2021,50(03):40.[doi:10.3969/j.issn.1001-8352.2021.03.008]
　ZHU Fuyuan,GUO Ziru,ZHANG Zhongyi,et al.A Flat Explosive for Explosive Welding[J].EXPLOSIVE MATERIALS,2021,50(03):40.[doi:10.3969/j.issn.1001-8352.2021.03.008]

备注/Memo

备注/Memo:
基金项目：江苏省自然科学基金项目（BJ97096）。
更新日期/Last Update: 2015-05-29