[1]艾光麾①,赵洪波②,李忠山②,等.基于高浓度浆料的模压可燃药筒的制备与性能[J].爆破器材,2026,55(03):24-29.[doi:10.3969/j.issn.1001-8352.2026.03.004]
　AI Guanghui,ZHAO Hongbo,LI Zhongshan,et al.Preparation and Performances of Molded Combustible Cartridge Cases Based on High-Concentration Slurry[J].EXPLOSIVE MATERIALS,2026,55(03):24-29.[doi:10.3969/j.issn.1001-8352.2026.03.004]
点击复制

基于高浓度浆料的模压可燃药筒的制备与性能()

《爆破器材》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
55
期数:
2026年03
页码:
24-29
栏目:
爆炸材料
出版日期:
2026-06-13

文章信息/Info

Title:
Preparation and Performances of Molded Combustible Cartridge Cases Based on High-Concentration Slurry
文章编号:
6096
作者:
艾光麾①; 赵洪波②; 李忠山②; 宋育芳③; 肖乐勤①; 周伟良①
①南京理工大学化学与化工学院（江苏南京，210094）
②西安北方惠安化学工业有限公司（陕西西安，710302）
③中国人民警察大学防火工程学院（河北廊坊，065000）
Author(s):
AI Guanghui①;  ZHAO Hongbo②;  LI Zhongshan②;  SONG Yufang③;  XIAO Leqin①;  ZHOU Weiliang①
①School of Chemistry and Chemical Engineering, Nanjing University of Science and Technology (Jiangsu Nanjing, 210094)
②Xi’an North Huian Chemical Industries Co., Ltd. (Shaanxi Xi’an, 710302)
③School of Fire Protection Engineering, China People’s Police University (Hebei Langfang, 065000)
关键词:
模压可燃药筒; 高浓度浆料; 分散剂; 浆料分散
分类号:
TQ560
DOI:
10.3969/j.issn.1001-8352.2026.03.004
文献标志码:
A
摘要:
为提高抽滤模压工艺制备可燃药筒的生产效率并减少废水排放，在浆料中引入离子型分散剂。将浆料质量分数由当前的0.5%提高至1.0%，浆料沉降速度降低近1半；通过抽滤湿坯、热压成型和定容燃烧试验考察了提高浆料质量分数后模压可燃药筒的力学性能和燃烧性能。采用添加分散剂的浆料制备的湿坯质量一致性有所提高，模压可燃药筒的力学性能和现行工艺制备的相当，燃烧性能正常。表明提高浆料质量分数可在保持模压可燃药筒质量的基础上提高生产效率和减少废水。

参考文献/References:

［1］苏精明, 王满林, 霍永清, 等.小口径可燃药筒与发射药匹配性研究［J］.兵工自动化, 2022, 41(12): 125-128.

SU J M, WANG M L, HUO Y Q, et al. Study on matching of small caliber combustible cartridge and propellant ［J］. Ordnance Industry Automation, 2022, 41(12): 125-128.
［2］QIAN H Y, YU Y G, LIU J. Effects of module number and firing condition on charge thermal safety in gun chamber ［J］. Defence Technology, 2022, 18(1): 27-37.
［3］JENZEN-JONES N R. Chambering the next round: emergent small-calibre cartridge technologies ［Z］. Geneva: Small Arms Surrey. Graduate Institute of International and Development Studies, 2016.
［4］徐文娟, 于军. 抽滤型可燃药筒性能及燃烧规律的研究［J］.华东工学院学报, 1988(1): 130-139.
［5］张满慧, 姚忠, 周宇, 等.模压可燃药筒的压缩力试验与轴压稳定性分析［J］.火炮发射与控制学报, 2024, 45(6): 43-50.
ZHANG M H, YAO Z, ZHOU Y, et al. Compression experiments and axial buckling stability analysis of molded combustible cartridge cases ［J］. Journal of Gun Launch & Control, 2024, 45(6): 43-50.
［6］李忠山, 田书春, 周逸, 等.纤维素甘油醚硝酸酯基模压可燃药筒的制备与性能［J］. 火炸药学报, 2019, 42(5): 521-525, 530.
LI Z S, TIAN S C, ZHOU Y, et al. Preparation and performances of molded combustible cartridge cases modified by NGEC ［J］. Chinese Journal of Explosives & Propellants, 2019, 42(5): 521-525, 530.
［7］李煜, 赵成文, 郭德惠, 等.可燃药筒的定容燃烧特性［J］. 火炸药学报, 2009, 32(4): 75-79.
LI Y, ZHAO C W, GUO D H, et al. Constant-volume combustion properties of combustible cartridge case ［J］. Chinese Journal of Explosives & Propellants, 2009, 32(4): 75-79.
［8］田书春, 周伟良, 李忠山, 等. 新型黏结剂和水性交联剂在模压可燃药筒中的应用［J］. 爆破器材, 2018, 47(3): 27-30, 36.
TIAN S C, ZHOU W L, LI Z S, et al. Application of a new adhesive and a waterborne cross-linking agent in molded combustible cartridge cases ［J］. Explosive Materials, 2018, 47(3): 27-30, 36.
［9］李忠山, 胡义文, 孟勇, 等. 阴离子羧甲基淀粉钠对模压可燃药筒性能的改进［J］. 爆破器材, 2017, 46(6): 26-30.
LI Z S, HU Y W, MENG Y, et al. Performance improvement of molded combustible cartridge cases by addition of anionic sodium carboxymethyl starch ［J］. Explosive Materials, 2017, 46(6): 26-30.
［10］邹伟伟, 肖乐勤, 周伟良.模压可燃药筒点火特性［J］.弹道学报, 2012, 24(1): 79-82.
ZOU W W, XIAO L Q, ZHOU W L. Ignition characteristics of molded combustible cartridge cases ［J］. Journal of Ballistics, 2012, 24(1): 79-82.
［11］REDLINGER-POHN J D. Angular segregation of fibres in pipe flow: floc formation and utilization for length-based fibre separation ［J］. Cellulose, 2020, 27(13): 7431-7446.
［12］VILLALBA M E, DANESHI M, MARTINEZ D M. Characterizing jamming of dilute and semi-dilute fiber suspensions in a sudden contraction and a T-junction［J］. Physics of Fluids, 2023, 35(12): 123339.

相似文献/References:

[1]田书春①②,周伟良②,李忠山①,等.新型黏结剂和水性交联剂在模压可燃药筒中的应用[J].爆破器材,2018,47(03):27.[doi:10.3969/j.issn.1001-8352.2018.03.005]
　TIAN Shuchun,ZHOU Weiliang,LI Zhongshan,et al.Application of a New Adhesive and a Waterborne Cross-linking Agent in Molded Combustible Cartridge Cases[J].EXPLOSIVE MATERIALS,2018,47(03):27.[doi:10.3969/j.issn.1001-8352.2018.03.005]

备注/Memo

备注/Memo:
收稿日期：2025-11-26
第一作者：艾光麾（2002—），男，硕士研究生，主要从事可燃药筒工艺研究。E-mail: ghai@njust.edu.cn
通信作者：肖乐勤（1972—），女，副研究员，主要从事固体推进剂及材料合成研究。E-mail: leqinxiao@163.com
更新日期/Last Update: 2026-06-13